-40%

R410, R410a, R-410, R-410a, Refrigerant Self-Sealing Leak Stop , 28 oz. Kit A3

$ 79.33

Availability: 47 in stock
  • Condition: New
  • Type: refrigerant
  • All returns accepted: ReturnsNotAccepted
  • MPN: R410A
  • Brand: Frosty-Freeze Refrigerants

    Description

    Gregoriou Brothers Refrigeration Since 1979
    Frosty-Freeze
    R410, R410a, R-410, R-410a, Refrigerant Self-Sealing Leak Stop , 28 oz. Kit A3
    This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only.
    We are a Certified UPS Haz Mat Shipper.
    R410a Refrigerant With Leak Sealer
    NOTE: You do not need to be EPA Certified to purchase Refrigerant R410A!
    Net Weight: 28 oz.
    Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the "mini-split"  A/C systems.
    As R22 is being phased out, R410a is now the refrigerant found on all "NEW" A/C Systems.
    (1) 28 oz. Can of Refrigerant R-410A with Leak Sealer.
    (1) MALCO Pocket Screwdriver that has a regular flat blade and a special valve core tool buil into the handle. It also has a pocket clip.
    *Tops off system.
    *Seals and Prevents leaks
    *Perfect for mini-split systems.
    The hose connection on top is 1/4" male flare with a internal valve core, this is the standard hose fitting for most gauge sets.
    (1) Nice Brass Cap with internal rubber seal as pictured!
    **WARNING**
    *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
    *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
    *CONTENT UNDER PRESSURE.
    *VAPOR HARMFUL SKIN AND EYE IRRITANT.
    DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY.
    ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
    USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
    DO NOT MIX WITH ANY OTHER REFRIGERANT.
    FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
    DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
    HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
    DO NOT PUNCTURE OR INCINERATE THIS CAN.
    DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
    KEEP OUT OF REACH OF CHILDREN.
    You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
    You must show proof of certification before paying and before the item is shipped.
    *If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
    Thank you.
    SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
    The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
    This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only. We are a Certified UPS Haz Mat Shipper. R410a Refrigerant With Leak Sealer NOTE: You do not need to be EPA Certified to purchase Refrigerant R410A! Net Weight: 28 oz. Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the "mini-split" A/C systems. As R22 is being phased out, R410a is now the refrigerant found on all "NEW" A/C Systems. (1) 28 oz. Can of Refrigerant R-410A with Leak Sealer. (1) MALCO Pocket Screwdriver that has a regular flat blade and a special valve core tool buil into the handle. It also has a pocket clip. *Tops off system. *Seals and Prevents leaks *Perfect for mini-split systems. The hose connection on top is 1/4" male flare with a internal valve core, this is the standard hose fitting for most gauge sets. (1) Nice Brass Cap with internal rubber seal as pictured! **WARNING** *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS. *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS. *CONTENT UNDER PRESSURE. *VAPOR HARMFUL SKIN AND EYE IRRITANT. DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY. ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT. USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A. DO NOT MIX WITH ANY OTHER REFRIGERANT. FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!! DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F. HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST. DO NOT PUNCTURE OR INCINERATE THIS CAN. DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F. KEEP OUT OF REACH OF CHILDREN.
    Gregoriou Brothers Refrigeration Since 1979
    Frosty-Freeze
    R410, R410a, R-410, R-410a, Refrigerant Self-Sealing Leak Stop , 28 oz. Kit A3
    This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only.
    We are a Certified UPS Haz Mat Shipper.
    R410a Refrigerant With Leak Sealer
    NOTE: You do not need to be EPA Certified to purchase Refrigerant R410A!
    Net Weight: 28 oz.
    Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the "mini-split"  A/C systems.
    As R22 is being phased out, R410a is now the refrigerant found on all "NEW" A/C Systems.
    (1) 28 oz. Can of Refrigerant R-410A with Leak Sealer.
    (1) MALCO Pocket Screwdriver that has a regular flat blade and a special valve core tool buil into the handle. It also has a pocket clip.
    *Tops off system.
    *Seals and Prevents leaks
    *Perfect for mini-split systems.
    The hose connection on top is 1/4" male flare with a internal valve core, this is the standard hose fitting for most gauge sets.
    (1) Nice Brass Cap with internal rubber seal as pictured!
    **WARNING**
    *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
    *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
    *CONTENT UNDER PRESSURE.
    *VAPOR HARMFUL SKIN AND EYE IRRITANT.
    DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY.
    ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
    USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
    DO NOT MIX WITH ANY OTHER REFRIGERANT.
    FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
    DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
    HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
    DO NOT PUNCTURE OR INCINERATE THIS CAN.
    DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
    KEEP OUT OF REACH OF CHILDREN.
    You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
    You must show proof of certification before paying and before the item is shipped.
    *If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
    Thank you.
    SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
    The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
    This item will be shipped ORM-D (which requires the package be marked as such, AND IT WILL BE!) with domestic shipping only.
    We are a Certified UPS Haz Mat Shipper.
    R410a Refrigerant With Leak Sealer
    NOTE: You do not need to be EPA Certified to purchase Refrigerant R410A!
    Net Weight: 28 oz.
    Refrigerant R410a is used on almost all "NEW" A/C Units and almost all of the "mini-split"  A/C systems.
    As R22 is being phased out, R410a is now the refrigerant found on all "NEW" A/C Systems.
    (1) 28 oz. Can of Refrigerant R-410A with Leak Sealer.
    (1) MALCO Pocket Screwdriver that has a regular flat blade and a special valve core tool buil into the handle. It also has a pocket clip.
    *Tops off system.
    *Seals and Prevents leaks
    *Perfect for mini-split systems.
    The hose connection on top is 1/4" male flare with a internal valve core, this is the standard hose fitting for most gauge sets.
    (1) Nice Brass Cap with internal rubber seal as pictured!
    **WARNING**
    *ALWAYS WEAR EYE PROTECTION WHEN WORKING WITH REFRIGERANTS.
    *ALWAYS WEAR GLOVES WHEN WORKING WITH REFRIGERANTS.
    *CONTENT UNDER PRESSURE.
    *VAPOR HARMFUL SKIN AND EYE IRRITANT.
    DO NOT CONNECT THIS CAN TO THE HIGH PRESSURE SIDE OF THE SYSTEM, THIS MAY CAUSE THE CAN OR CONTAINER TO BURST AND RESULT IN SERIOUS INJURY.
    ALWAYS REPAIR LEAKS BEFORE ADDING REFRIGERANT.
    USE ONLY IN SYSTEMS DESIGNED FOR REFRIGERANT R410A.
    DO NOT MIX WITH ANY OTHER REFRIGERANT.
    FOR LOW PRESSURE SIDE OF THE SYSTEM ONLY!!!!
    DO NOT EXPOSE THIS CAN TO HEAT OR STORE IN TEMPERATURES ABOVE 120 F.
    HIGH TEMPERATURES MAY CAUSE THE CAN TO BURST.
    DO NOT PUNCTURE OR INCINERATE THIS CAN.
    DO NOT STORE IN PARKED VEHICLES WHERE THE INSIDE TEMPERATURE MAY EXCEED 120 F.
    KEEP OUT OF REACH OF CHILDREN.